It is used for concrete bases, calcium sulphate and cement plastering, gypsum plasterboard, gypsum-fiber sheets and for any other plaster and cement surfaces that do not require a base, thick-layer coating. It is recommended for the use inside heated rooms with normal humidity. Thanks to the optimal combination of components and polymer additives Sh-1 Filling can be applied in the layer up to 10 mm and to obtain a solid, smooth and non-bleaching white surface. Smooth and non-shrink surface obtained after applying the filling allows to reduce paint consumption and repair expenses. It has high adhesive and crack-resistance characteristics and ensures long-term preservation of the quality of the surface obtained. The obtained vapor permeable surface helps to create a favorable climate in the room.
Packaging option: 25 kg.
Application temperature range: +5-+30 °С.
The amount of water per 1 kg.: 0,40-0,45 l.
Layer thickness: до 10 мм.
Material consumption: 2-5 kg./ 1 m2.
Water solution viability: 120 min.
Curing time: 6-7 hours.
Frost resistance: 35 cycles.
Compressive strength: not less than 0,2 MPa.
Adhesion strength: 0,4 MPa.
Storing period: 12 months.