This glue for foamed concrete with lower thermal conductivity is intended for gas- concrete and foam-concrete and polystyrene concrete blocks, sand-lime brick and non-load-bearing clay tile. When diluted an easily spreadable solution is obtained; this solution has higher adhesive and thixotropic characteristics which can be applied either on vertical or horizontal foundations. It is also good for further filling-up and leveling of walls made of blocks of this kind. It solidifies without contraction and has high adhesiveness with mineral foundations. It has great adhesive characteristics, plasticity, freeze resistance and low thermal conductivity which allows it to conserve heat.
Packaging option: 25 kg.
Application temperature range: +5-+35°С.
The amount of water per 1 kg.: 0,19-0,22 l.
Layer thickness: 2-4 mm.
Material consumption: 1,6 kg/m2 at 2 mm.
Water solution viability: 180 min.
Correction time: less than 25 min.
Setting time: 24 hours.
Adhesion strength: 0,3 MPa.
Compressive strength: 5 MPa in 28 days.
Frost resistance: 35 cycles.
Storing period: 12 months.